Why You Need Laminating Machines

Why You Need Laminating Machines

Last Updated on by Daniel Lawrence

Laminating machines are oftentimes underrated. But they are really great devices. Reading through this guide will inform you about the importance of laminating machines.

What Is a Laminating Machine?

A laminating machine is a device that covers a document or other material with a protective layer on both sides. Usually, this layer is a plastic film, which is heat-bonded to the material and confers increased strength, durability, and longevity to it.

There are different lamination processes, depending on the type of materials to be laminated. The materials used in laminates can be the same or different, depending on the processes and the object to be laminated. An example of the type of laminate using different materials would be the application of a layer of plastic film—the “laminate”—on either side of a sheet of glass.

  • Extensive Laminator

There are a couple of distinctive sorts of covering machines out there to browse. The hot overlaying machine comes in two sorts, the extensive film composes and the pocket compose. The substantial hot laminator is intended for covering huge things or numerous things at the same time. The machine is swung on to warm up and the things are set on the base sheet of clear cover.

A roller close to the warming component holds the best layer of the overlay. At the point when the machine is turned on the rollers pull the base layer forward as the best layer is taken off at the same time. The warming instrument seals the two layers together wherever they contact, fixing the thing inside.

  • Pocket Laminator

The best home laminator machine is comparative in that it warms the overlay and seals the two sides together. In any case, the cover itself isn’t connected to the machine. It comes in an advantageous letter or littler sizes. The client puts the thing to be covered inside the overlay pocket and turns the machine on to warm up.

When prepared, the pocket is put in the machine and rollers pull the pocket through the warmth as it goes. In the two instances of hot overlay machines, the two layers comprise a cement pitch and a polyester-based layer. At the point when the two touches and are warmed, the tar melts to make the hard surface as it bonds with the polyester layer.

  • Cool Laminate

The other kind of cover is chilly. It is utilized for things that may be delicate to warm, for example, duplicates and even some ink stream print. For this situation, the overlay is initiated through weight rather than warmth. It is sent through a machine that rolls the two layers together and squeezes them set up.

A heated roll laminator uses heated rollers to melt glue extruded onto lamination film. This film is in turn applied to a substrate such as paper or card using pressure rollers. The primary purpose of laminating with such a machine is to embellish or protect printed documents or images.

Types of Laminating Machines

Laminating machines are either hot or cold. A hot laminating machine is the most common, but because some documents are heat sensitive, a cold machine is the most appropriate choice for some uses.

  • Hot Pouch Laminating Machines

For these types of laminating machines, the lamination material comes in “pouches” which are actually two sheets of plastic film bound on one edge. Items are placed in an appropriately sized pouch, trimmed, and then placed in a cardboard carrier. The carrier is a simple piece of heavy card stock, similar to a file folder, and it protects the lamination pouch from direct contact with the hot rollers.

Once a machine is warmed up and your item is snugly protected in the carrier, you place the closed edge of the carrier in the mouth of the laminating machine, and the rollers pull it slowly through, heating the carrier and lamination pouch.

The heat reacts with the pouch, activating an adhesive which then binds to the paper, and the carrier exits the back of the machine with the newly durable, aesthetically enhanced item, ready to be placed on a wall, in a wallet, or wherever the laminated product will find its new home.

  • Cold Pouch Laminating Machines

If the document was printed on an inkjet printer, came from fax, or is a photo, it may be sensitive to heat and a hot laminating machine could cause the colors to run. Cold laminating machines use pressure to activate the special cold laminating pouches.

Some don’t even require electricity and operating them requires simply inserting the cold pouch and turning the crank. Safer and easier to use, cold laminating machines can be a great option, but hot machines still produce better quality and durability.

  • Roll Laminating Machines

Roll machines are used in commercial and industrial settings where a large poster size is desired and speed is necessary. Roll machines don’t use pouches. The lamination film is on a roll that’s attached to the lamination machine, and the lamination film is heated before contact with the paper. This increases speed and efficiency and allows users to complete bulk laminating projects in a reasonable amount of time.

Whether you opt for hot or cold pouches, several other variables are considered before choosing a specific model. Pouch sizes range from ID card to poster size. Think about the projects that may spring up in the future and be sure to select a machine that can accommodate the largest pouch size you require.

How heavily does your lamination need to be? Extra thick pouches are not compatible with all laminating machines as they require more intense heat than the lighter duty machines provide, so be sure to confirm the maximum pouch thickness recommended by the manufacturer. Speed should be considered as well. If you intend to use your laminating machine frequently, it would behoove you to pay a little more for a faster model.

Primary Benefits of Lamination

  • Lamination increases the durability of print materials, allowing them to withstand frequent use.
  • Lamination adds protection against fingerprints and smudges, stains and spills, tears and wrinkles, marks and abrasions, plus oil, grease, dirt, moisture, and other contaminants.
  • Lamination improves appearance by enhancing the ink colors of the printed piece. This creates a more professional look and holds attention longer.
  • Lamination adds strength and stiffness, providing an impression of higher quality and importance.
  • Lamination is completely transparent and does not impair or blemish the printing in any way.
  • Lamination has a reasonable cost. Also, because lamination increases the longevity of print materials, it saves money on reprinting.

Here are some advantages and disadvantages of a cold laminating machine versus a hot laminating machine:

  • The cold lamination machine can do the job at a decent speed as the setup time is faster. There is no need to wait for the machine to warm up as compared to a hot laminating machine.
  • The machine is easier to operate, and this is more convenient for inexperienced people.
  • In terms of safety, a cold lamination machine is better as there is absolutely no chance of anyone getting burned by high-temperature lamination.
  • The machine requires lower maintenance as compared to a hot laminating machine. This is because the hot laminating machine needs to be cleaned frequently to ensure good results.
  • The lamination final result is better as there is no incidence of bubbles, curling, or waves in the laminated product, which happens when using a hot laminating machine.

Uses for a Laminating Machine

There are many uses for a laminator machine. Here are a few ideas you can use in the office or at home.

  • Laminating Personal or Business Documents

The most common task for many people is to laminate their documents. This can include personal contact information, instruction manuals, or even their itinerary.

  • Laminating Photos or Identification

Many people like to laminate small photographs of their family or close friends. Laminate your small photo and keep it in your wallet or purse and it will last the test of time. It is also common for workplaces to laminate photo identification.

  • Laminating Maps

If you’re traveling, why not laminate your maps too? When you plan your trip, mark all the points of interest you want to visit and then laminate the map! A very easy and convenient way of avoiding smudges or stains. You can also laminate maps for fire escape routes in your office building.

  • Laminate Place Cards

If you are planning an event and have reserved seating spots, create place cards with the person’s name. An easy way of making sure everyone has been organized and ready to start the event.

  • Laminate Banners and Signs

Print out your banners or signs and laminate them. If you are running a pop-up store, there is a cost-effective way of creating banners for your store. Food establishments can also print out menus and laminate them.


laminating machine is to protect and enhance the quality of the material which is being laminated. Laminating sheets add a layer of clear plastic which protects the laminated material from smudges, stains, and liquids. The plastic sheet also adds a very durable layer of protection to your laminated item. There’s no reason not to use a laminating machine.