Tips To Maintain Your TV Set and Computer Monitor
Last Updated on November 30, 2020 by Daniel Lawrence
Prevention, as we all know, is better than cure. Therefore, following few tips to maintain your TV set will save you the cost of repairing and replacing new parts and most importantly, will extend the life of your LED TV or LCD TV.
Maintenance is not really a difficult thing to do if only we can make it part of our daily routine. So many TV sets have lived a short life just because of simple things we forget to do like Many a time like turning off the TV before sleeping or making sure it’s well placed during installation.
From our discoveries, one of the biggest enemies of electronics gadgets is dust. One dust particles begin to build up in your TV (especially on the inside) it gives rise to component failures which in turn can damage the TV. Apart from that, there’re several other things that can damage your TV if not properly maintained. So here are 10 tips to maintain your TV set and also included are some tips for maintaining your computer monitor.
1. Use a voltage regulator or a surge protector
One of the tips to maintain your TV set is to be careful about extreme voltage spikes. This can harm your electronic devices to a great extent. Voltage spikes, by and large, happen at whatever point there are power cuts and when the power gets back out of the blue. Voltage variances may likewise happen notwithstanding when there is a nonstop power supply or during rainstorm and lightning. However, with the help of a voltage regulator, it can protect your TV as well as other electronic gear like your forced air system, fridge, clothes washer, and your microwave. You can likewise get a flood defender, that is very conservative.
2. Switch-Off your TV Regularly
Because of the lifecycle of the TV which is approximately 65,000 hours, it’s best you switch off the TV whenever you not watching it so the lifecycle can last longer. the more you leave your TV on, the more the lifespan reduces. And when it gets to that period, the TV begins to develope fault and might eventually go beyond repair if not properly handled.
3. Keep the sharp objects away
Sharp articles can without much of a stretch devastate your screen and can make changeless harm now and again since LCD screens are a lot more slender. Along these lines, fend off such objects as much as you can.
4. Appropriate use of contrast
Utilizing high contrast levels diminishes the life expectancy of your TV screen. The image quality will undoubtedly diminish in a couple of years as additionally handling force is utilized at high contrast levels. Along these lines, it is prudent to fluctuate the complexity rates now and again.
5. TVs also need to breathe
Your flat screen LCD TV requires a fair space for ventilation. By and large, it produces a great deal of warmth because of the measure of power utilized. So, it is ideal to utilize your TV in an open space without humidity so it cools independently from anyone else when you switch off your TV. What’s more, notwithstanding when you are utilizing it, the interior circuit would not warm to such an extent, in this manner expanding the life expectancy.
6. Optimal brightness
Modifying the brightness settings to the most extreme level consistently can likewise diminish the life expectancy of your TV. It isn’t prudent in the event that you need your level screen to work for long. An excess of brilliance causes eye strain, so it is smarter to keep the brightness at an ideal level.
7. Clean your TV from time to time
It is prescribed that you get great quality items that are intended for cleaning your TV sets. Some of the time, dust accumulates on the screen, influencing permeability. Never use water to clean the screen. Hostile to electricity produced via friction chemicals are an absolute necessity and are safe to use.
8. Keep dust away
As referenced before, dust is inconvenient to your TV’s wellbeing. What’s more, it can settle on your screen as well as in the inner parts of your LCD screen set. It can make your TV react gradually. You can utilize electronic vacuum siphons that are intended for family unit electronic items to blow out the dust.
9. Burn-in prevention
You can forgo utilizing your TV for extensive stretches of time as the pictures that stay for a more drawn out time than the others, will begin having burn-ins.
10. Avoid low temperatures
Cold temperature makes buildup and it can saturate other indispensable parts inside your TV. In this manner, it is prescribed not to turn on your TV in frosty temperatures.
At UrbanClap, we furnish you with the best of experienced experts, who are very much aware of TV upkeep tips and would help you in getting great quality items for keeping your level screen solid, in the solace of your own home.
Do LCD TVs Overheat?
How long should you leave a TV on?
How do I take care of my LED TV?
- Adjust your TV brightness. LED TVs have white lights or sometimes RGB lights that dim overtime.
- Adjust the contrast.
- Use a microfiber cloth to wipe the screen
- Be careful when cleaning with liquid.
- Avoid long TV marathons.
How to Take Care of Your Computer Monitor
Your PC’s screen is one vital part of your computer unit. It showcases pictures on its screens, for example, the Microsoft Windows7 work area or a record in a product program. Since you’ll be taking a look at the screen each time you utilize your PC, you have to deal with it to keep up its life span.
Here are some tips to help you maintain your computer monitor
Use a good surge protector. Do not plug your monitor directly into a wall socket. Instead, be sure to use a good-quality surge protector. Damage caused by an electrical spike ordinarily isn’t covered by manufacturer warranties.
Keep the air vents open. Do not cover the air vents on the top or sides of a monitor. Doing so may result in a dangerous buildup of heat that can damage components or shorten their lifespan. Periodically, use a new paintbrush or the brush attachment of a vacuum cleaner to remove accumulated dust on the monitor’s ventilation holes.
Leave your monitor on. One of the most dangerous moments in an electronic component’s life is when power is first applied, and the component goes from cold and uncharged to warm and full of electricity. Avoid turning your monitor on and off more than necessary. If the power supply is unstable, connect the monitor to a UPS.
Check the connections.
Ensure that the connection between the screen and the video card is immovably joined at each end and not pleated or squeezed. On the off chance that you have to make modifications and your screen has a removable cord, unplug it and after that replug it into the container on the screen. This progression could reset a free connection and evacuate consumption on any of the connectors.
On the off chance that that doesn’t work, unplug and reconnect the screen cord at the PC end. You may need to utilize a screwdriver or thumbscrew to open the connection before you can unplug it. Utilize these locking screws when you replug the cord.
Proper Placement. Be sure that the monitor is safely installed or well placed on a sturdy desk, with its cable properly out of tripping range of passersby. And, of course, don’t place cups of coffee or soda anywhere in the vicinity. Also, make sure it is placed in a well-ventilated area so as to avoid overheating.