How to Set Up a Projector

Last Updated on

Having problems connecting your new projector to your system? or you probably don’t know how to set up a projector? well, you’ve landed on the right page as you’ll get all the assistance you need to successfully set up that projector.

Unlike other computer accessories, a projector isn’t a plug and play device. There are a few setup measures required for you to execute before it starts projecting your image or video. Here, we’ll show you how to set up your projector for the big movie, TV show, video game or office presentations.

To get started, once you’ve bought a new projector and you ready to get it installed, you’ll have to find a space, get the image in focus and fiddle with a few other settings both on your laptop and the projector. Have it in mind that you’ll also be using a screen, and you might have to run some extra cables from your gear to your projector.

With that being said, and without further delay, here how to set up a projector.

Steps on How to Set Up a Projector

1. Find The Right Location

How to Set Up a Projector

The initial step is making sense of where you’re going to put the device. You’ll require enough space for the projection itself – either a screen (prescribed) or a fix of the clear divider (as near white as could be expected under the circumstances). The greater that projection, the better. Projectors can commonly convey pictures as little as 40 or 50 inches and as colors as 300, estimated corner to corner. Remember that bigger pictures will be dimmer.

Greater pictures additionally expect you to move the projector further back. What’s more, except if you mount the projector on the roof, you won’t almost certainly sit in the way of the bar, so think about the seating course of action.

2. Set Up The Screen

How to Set Up a Projector

On the off chance that you have a screen, the following stage is getting it set up. Also, we exceptionally prescribe a screen. It gives a uniform clear surface (no light switches or different dividers “highlights”), and screens can reflect or even enhance your projector’s light superior to anything a divider, conveying a more splendid picture.

3. Get The Right Height

How to Set Up a Projector

If you’re utilizing the most widely recognized projection direction: a table mounts from the front. The idea is comparable for roof mounts and back projection setups, be that as it may.

Most projectors are intended to fix up generally with the center of the focal point somewhat over the base edge of the screen, so you’ll need a little table or other help that is the correct height. The closer you can get to this perfect height, the more squared-off your picture will be. In the event that you get a unit with a vertical focal point move, you’ll have more range to play with.

4. Plug Everything in and Turn it on

Presently it’s an ideal opportunity to make associations. That implies control for the projector and whatever gear (link box, streamer, game support, Blu-beam player, or what have you) you’re interfacing, and no doubt running HDMI cables between the source and the projector. In the event that you have your apparatus reserved someplace, you may need to get a long HDMI link to keep running among it and the projector. When everything’s connected, fire up the projector.

5. Project an Alignment Image

To get the anticipated picture putting its best self forward, you’ll need to have a reference still example. A few projectors have worked in test designs for this reason, yet on the off chance that yours doesn’t, you could utilize a setup disc or download a picture on the web. This will help you get a glance at how the real image or video will look like when projected and would have an opportunity to make adjustments if need be.

6. Adjust the Projected Image

Check the focal point of the lens with the center of the screen. Ensure the projector is as level and opposite as conceivable with respect to the screen. The furthest edges of the anticipated picture ought to be a similar size, and preferably, the whole screen ought to be filled. You can utilize the zoom control (if accessible) to measure the picture appropriately.

Modify center until images are sharp (walk nearer to the screen on the off chance that you can’t tell). In the event that the inside is in focus however the corners aren’t, it could be a sign that the projector and screen aren’t exactly opposite.

To tweak you can utilize the movable legs and supports on the projector, or even slip coins under the feet. On the off chance that you make a lot of a point, you can utilize the cornerstone control to address it, yet attempt to abstain from doing as such since it disables resolution.

At last, the picture most likely still won’t be immaculate, however ideally, it’s nearly enough for you to proceed onward.

7. Select The Right Picture Mode

Like TVs, projectors have preset picture modes, so you’ll need to pick the correct one. The best one for generally speaking picture quality in a dim room is commonplace “Film” or “cinema.” If you’re managing surrounding light, you should need to pick a more splendid mode, yet know that they regularly slant green. Numerous projectors have a game mode, yet when we tested, we discovered they don’t regularly improve info slack past what you get in Movie mode.

8. Consider Better Sound

Most projectors have worked in speakers, however, they’re horrible. A major picture call for greater sound than that. On the off chance that your room doesn’t have an all-out sound framework, we suggest at any rate associating a good Bluetooth speaker (you’ll most likely need one with assistant information) or other powered speakers.

9. Turn Off The Lights

After going through these setup process, all you need to do is to turn off the lights relax and enjoy. However, if you are giving a presentation in an office or a gathering, try to make the room as dark as possible. Projected images are best enjoyed in the dark, where the pictures look their best.

To place the image on the screen at the proper angle, if the projector is placed on a table, raise or lower the front of the projector using the adjustable foot (or feet) that are located on the bottom front of the projector – Sometimes there are also adjustable feet located on the left and right corners of the rear of. You could also place objects under the projector in other to create balance.
To switch from computer to projector, select duplicate mode if you want your laptop image to display on the data projector screen. Select extended mode if you want to display different content on your laptop and the data projector screen. The keys act as a toggle switch. Press and hold down the function key (Fn) and the appropriate F key (F1-F12).
Dual monitor, or monitor with projector display setup with Windows 8 and Windows 10
  • Right-click any empty area of your desktop, and then click Display Settings.
  • Click the Multiple displays drop-down list, and then select Extend these displays, or Duplicate these displays.
  • Select Apply.
  • Click Keep changes.
To connect my projector to my TV, simply select the input source on your projector that corresponds with the type of cable connection that you used to connect your TV to the projector. If you used an HDMI cable, select “HDMI” on your projector, whereas if you connected using component video, select “Component Video” on your projector. By doing that, your projector will be automatically connected to your TV without any further manipulations.