How to Fix External Hard Drive Not Working

If you have been having issues with your external hard drive or USB flash drive and you’ve searching for a solution, well, you just found the right place to give you a step by step guide on how to fix your external hard drive not working issue.

Apart from giving you a guide on how to fix your hard drive not working, we’ll also show you how to format your hard drive and how to recover lost  files from external drives.

To carry out this fix, all you need is a PC or laptop, and a little bit of your time.

So if you ready to fix your external hard disc not working issue, here are the steps to follow below.

Quick fix: Verify the Power Management For USB Hub

Associate your external hard drive to another USB port or another PC to look at whether it’s truly not reacting, or only a harmed USB port that prohibits your drive to appear on the PC.

In the event that it doesn’t work in the wake of changing the USB port or can’t be read by another PC, attempt the following solution underneath to fix an unrecognizable external hard drive now:

1. On your system, Open Run (Windows + R), and type devmgmt.msc and hit Enter.

2. Select the Device Manager > and expand the “USB controllers”.

3. Right-click on USB Root Hub > Properties > Power Management > then uncheck “Allow the system to turn off this device to save power” and then click OK.

  • On the off chance that your external hard drive is physically harmed or broken, take it to a close-by support place for a manual fix.
  • Also, if it simply doesn’t work or react, simply use the three strategies beneath to fix a not working external hard drive on Windows 10/8/7 PCs.

Part 1. Fix External Hard Drive not Working Issue in Windows

The absolute initial step for fixing external hard drive not working issue is to make not working drive appear or be perceptible by a Windows 10/8/7 PC or laptop. However, Here beneath are some 100% fixes offered by expert directors that you can attempt. We’ll be attempting three methods below.

Method 1: Boot PC/Laptop into Safe Mode and Check The Hard Drive Issue

If you insert your external hard drive, USB or SD card into your laptop and it doesn’t show up, the problem might exist on your laptop. If that be the case, you can restart the PC or laptop into Safe Mode and then verify where the issue is coming from.

Method 2. Run a Disk Checkup and Fix Internal Errors on External Hard Drive

With this method, you have two options to verify the external hard drive and fix internal errors on a not responding external hard drive:

First: Verify and fix external hard drive not responding errors using partition manager software tools.

Step 1: Insert your SD card or external hard drive into your computer and run EaseUS Partition Master. Right-click the partition on your external  storage device and select “Check File System”.

Step 2: In the new window, click the option “Try to fix the errors if found” then select and click “Start”.

Step 3: Then EaseUS Partition Master will now automatically verify the file system error on your SD card, USB flash drive, or external hard drive. When it’s done checking, click “Finish” to stop the whole process.

Option 2. Run CMD (command prompt) to Manually Check and Fix External Hard Drive Errors

Step 1: Open Command Prompt on your system and type: chkdsk /f a: (replace a with the drive label of your external hard drive or USB flash drive).

Step 2: After that, press Enter to let the verification process to begin.

Step 3: When the verification process is done, type: exit and then press Enter to finish the process.

After running this process and your not responding external hard drive isn’t still showing up, then I think it’s time to try Method 3 and hope it fixes the problem.

Method 3. Force Not Responding External Hard Drive to Show Up by Uninstalling Drivers

Step 1: On your system, open Run (Windows + R), type “devmgmt.MSc” and press Enter.

Step 2: Select Device Manager > Open Universal Serial Bus controllers > Verify whether any device shows up or is highlighted as unrecognized.

Step 3: If it shows up as an unrecognized device, enter the Drivers tab and remove or uninstall the driver. Then verify whether the external hard drive pops up on My Computer or not.

Step 4: If it still doesn’t show up, turn off or restart the computer.

Step 5. On the event that it shows up but disappears later, try the above steps again and go to “Disk Management” > change the drive label OF YOUR EXTERNAL DRIVE ONLY > Go and select a new drive label to replace the old one of the non-responsive drive by selecting “Change”, and click “OK” to accept. On doing that, the not responding external hard drive can now be read and accessed.

If similar problem is affecting your USB drive, SD card or internal hard drive partitions, you can as well use the above methods to fix them.

Part 2: Restore Data After Fixing External Hard Drive

On the off chance that you are as yet incapable to get to your information in the wake of fixing your external hard drive not working issue, don’t stress. For whatever length of time that the external hard drive isn’t physically harmed, you can recuperate all your information with EaseUS Data Recovery Wizard. This information recuperation program enables you to examine and restore information from the external hard drive when it can’t be recognized or identified by a PC or when it winds up blocked off because of disc damage.

Subsequent to fixing the External HDD not working or reacting issue with the offered strategies in Part 1, you can also follow these means to know how to reestablish information from the external hard drive with HDD recuperation software with straightforward steps now.

Step 1. Select the external hard drive

Since you’ll be recovering data from the external hard drive, you’ll have to run EaseUS Data Recovery Wizard, and below the External Devices tab, select the exact drive where you lost your data’s and then Click Scan.

Step 2. Scan for lost data

Once you click on scan, the software will begin immediately to scan all over the selected drive for all lost data. During the process of scanning, you will see more and more data showing up in the results.

Step 3. Preview and recover data

Once the scan is complected, check the scan results for the desired data. You can also preview each file by double-clicking on it. Select Recover and choose another location to save the recovered data.

Part 3. Repair and reset not working external hard drive by formatting

Once you’re able to fix your unrecognized external hard drive issue and after being able to recover lost data’s, the next thing to do is to make sure your external hard drive is safe for saving new data once more.

To do this, it’s recommended that you format it with Windows disk management tool. To format an external hard disc drive, follow the steps below.

Step 1: On your system, goto Run (Windows + R), then type “diskmgmt.msc” and press Enter.

Step 2: Enter Disk Management, right-click on the external hard drive, USB or SD card, and select “Format”.Click on Device Manager > and expand “Universal Serial Bus

Step 3: Select a file system type like NTFS or FAT32 and perform a quick format.

Make sure you select a file system for your external hard drive. Either NTFS or FAT32 anyone would be perfect, although they have there differences.

Note: The strategies offered in this article can likewise be used to fix and repair SD cards, memory cards, USB drives, flash drives or hard drive partitions, and so on gadgets with not reacting/working or imperceptible issues. In the event that you are having comparative issues with your storage gadgets, use the above strides to get your concern tackled at the present time.