Form 3 3D Printer Review

Form 3 3D Printer Review

Last Updated on by Daniel Lawrence

Just before Form 3, Form 2 was delivered with practically a similar form volume, yet chipping away at SLA. Be that as it may, with Form 3, Formlabs has rolled out certain improvements to what it calls Low Force Stereolithography. It asserts that this new cycle is far and away superior. In light of this distinction, the two printers, Form 2 and Form 3 are totally various machines when looked nearer. Allow us to look at what Formlabs has got us this time with their new arrival of Form 3.


Form 3 3D Printer

Form 3 depends on LFS (Low Force Stereolithography). With numerous extraordinary highlights under its hood, the 3D printer flaunting wonderful looks is set to make a tremendous commitment to those in adoration with SLA innovation and have not had the option to approach it.

Dark body with orange hood is an eye-getting blend and the manner in which it works is likewise lovely not quite the same as loads of other desktop printers chipping away at SLA innovation. Along these lines, let us dig further into understanding the different highlights of this machine that makes it worth all the buzz.


Setting up Formlabs Form 3 3D printer is simple and should be possible in almost no time. The directions are given to help you through the setup cycle. You should introduce a form stage, tar cartridge, and pitch tank inside the printer. This is a one-time work except if you choose to change the materials. It is not difficult to adhere to the directions to set up the printer. They have online recordings accessible on the site to assist you with the whole cycle.

With programmed print bed evening out, you are simply needed to interface your 3D printer with a wi-fi network. You can likewise utilize a USB or ethernet association to load your printable document. With no wreck cartridges, eliminating and connecting the material is likewise straightforward. You are needed to utilize just Formlabs materials. In any case, you do get a colossal material choice with a sweeping library of expert cartridges detailed for various ventures.


Form 3 3D Printer

The Form 3 is certifiably not an especially quick printer, taking between 10 hours and 17 hours and 21 minutes to finish our standard 4.5-inch Thinker test print, depending on where we set the layer height. SLA printers are not for the most part exceptionally quick, and Form 3 doesn’t resist the pattern. These occasions are tantamount to different SLA printers like the Peopoly Moai, which took between 7 hours and 20 minutes and 18 hours to deliver a comparative print.

One thing to note, however: while our tests were finished with the standard dark and clear tars from Form, the organization offers an extraordinary tar called Draft Resin, which can be imprinted in layers 0.3mm thick. That would make printing fundamentally speedier, yet less definite. That tar wasn’t accessible for us to test.


Form 3 from Formlabs has a serious respectable form volume of 145 x 145 x 185 mm. The organization accepts that this structured space is sufficient to oblige the necessities of over half of the market clients who are engaged with 3D printing. The UI board is likewise decent with a 5.5-inch touchscreen. This is near the size of the majority of the cell phones in the market nowadays. This obviously implies that there will not be any issues while interfacing with the board as we ordinarily do with our cell phones. The resolution is likewise one of the edges of the 3D printers Formlabs produces.

The z layer resolution of Form 3 could be changed from 25 to 300 microns. Simultaneously, the XY layer has a set resolution of 25 microns. This is sufficient to assemble incredible models including better subtleties. As referenced previously, the Form 3 3D printer deals with LFS innovation which is comparative however not actually a match to Stereolithography. It utilizes the Light Processing Unit of 250 mW405 nm. One can work with Formlabs pitch cartridges with in excess of 20 material alternatives to browse.

Build Volume 145 x 145 x 185 mm
Laser Light Processing Unit (LPU), 250 mW405 nm
File Type STL, OBJ
Product Dimensions 405 x 375 x 530 mm
Product Weight 17.5 kg


Print materials

Form 3 is intended to work with parts and materials just from Formlabs. You need to purchase the gum tanks and cartridges from the printer creator. Another tar tank will cost you $149, while a cartridge that contains a liter of gum costs $149 for the standard tar, $175 for the intense gum, and $299 for the castable wax tar that goldsmiths and craftsmen use to make molds. It is feasible to utilize outsider pitch with Form 3 by filling one of the printer’s cartridges with another supplier’s, yet Formlabs claims that this could void the Form 3 guarantee. For reference, we got seven genuinely huge prints out of a solitary cartridge of the dim pitch, so each print cost about  $21.

Pros Cons
Good quality prints Post Processing Requirement
Cost-effective Need support structure for prints
The print speed is fast as compared to its predecessor
The surface quality is improved
Advanced SLA technology coined as Lower Force Stereolithography
Controlled monitoring is available
Closed body, hence safe


Form 3 is a genuine plug-and-play 3D printer. We didn’t need to do any tweaking or messing around to get printing — we just connected the Form 3 stacked it up and began printing. The entire interaction was spotless and for the most part, bother-free, which is a ton not quite the same as run-of-the-mill SLA printers that require a ton of tweaking, alignment, and other fiddlings to get great outcomes. Form 3 simply works. At $3,499 and up, however, the Form 3 is additionally quite possibly the most costly 3D printers we have tried, and it is costly to run. For experts and any other individual who depends on 3D printing, that will not be an issue.

The Form 3 will cost a great deal forthcoming, however will be awesome for the simpler printing it offers. For aficionados and beginners, it’s trickier, as you can get similarly great outcomes from a lot less expensive printer like the $1,999 Peopoly Phenom on the off chance that you are set up to set aside the effort to change the printer and build up a work process for cleaning and solidifying prints subsequently. All things considered, if 3D printing is a basic piece of your work process, you’ll be satisfied without breaking a sweat of utilization and quality outcomes you’ll get by Form 3.